Order Via Phone! Call

0743 050 580

Sanford Grey Wood Effect Floor Tile - 240 x 950mm

Suitable For Low Traffic Areas, Residential Use
SKU
KRTLSGM

Sanford Grey Wood Effect Floor Tile - 240 x 950mm

Suitable For Low Traffic Areas, Residential Use
SKU
KRTLSGM
Special Price Sh 66,000 / m2 was Sh 68,500 / m2
Sold asSh 90,288 per box
How much do you need?
-
+
Boxes
OR
-
+

Online Shopping with CTM is Safe & Reliable
About

The SANFORD series is a wood-looking porcelain tile made in Spain. This beautiful tile come with a true-to-nature textured finish that accurately simulates a natural wood floor. The non-rectified or pressed edges simulate a distinctive hardwood look; and the soft matte finish feels real to the touch. The Sanford series, designed and manufactured in Spain by Keratile is subject to strict quality standards to make sure the tiles are free of defects and are consistent in size and tonality. Keratile’s products go through several inspections and quality controls to make sure that each tile surpasses the industry standards. The SANFORD porcelain tiles are more than adequate for high traffic areas in residential applications, and moderate traffic in commercial settings.

Product Overview

  • Non-rectified edges provide a distinctive hardwood floor look.
  • These tiles come with a soft matte and textured finish that simulates a distressed hardwood floor.
  • The color variation from tile to tile is somewhat noticeable (V3).
  • Excellent for high traffic areas for residential purposes and moderate traffic areas in commercial settings.
  • This tile is frost resistance and allows for covered outdoor applications.
  • Do not install in brick pattern or 50% offset. Doing so will accentuate the bowing effect that is inherent to tile manufacturing.
  • A smaller 1/16 in grout line can be done but doing so can cause some unevenness or “lippage” between tiles if not done properly.
  • The use of a leveling tile spacer system is highly recommended when installing plank tiles.
  • The use of a multi-purpose polymer modified thin-set mortar is recommended for these tiles.
Similar Products

 
 
 

Ready when you are!

Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.

Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.

 

How To Install Tiles

  • As with everything you buy, it is important to check that you are 100% happy with the product before you install. Please compare the product to the images you saw online, check the shades and colour of the tile before you start. If you are not on-site, get your tiler to send you an image of a dry layout to approve. 
  • When you are ready, make sure that surface is dry, clean, flat and firm. Do not tile on old floor coverings like vinyl tiles.
  • Check screen, substrate and foundation are set for tiling.
  • Make sure there are expansion joints in the screed.
broom-unsplash-new
  • Tiles are a fashion item and as new tile designs come in, you may not get the same size and shade of tile as what you originally bought.
  • Always buy 15% more meter squared of tiles than the size of the area you will be covering, as there will be offcuts when installing.
  • Always keep a spare box or two of tiles, for future renovations and incidentals.
tile-purchasing-new
  • Make sure you have read any brand-specific instructions, listed on your tile box before starting to tile. 
  • For Kilimanjaro tiles, for example, make sure you are following the extrusion lines on the back of the tile when laying your tiles
  • Start tiling in the middle of the area.
  • Make sure you’re using the correct adhesive for the application.
  • Check screen, substrate and foundation are set for tiling.
  • Apply adhesive evenly using a notched trowel. (Apply 1m2 at a time)
  • Only mix enough adhesive to use within 1 hour.
  • Work over small areas so the adhesive does not dry.
  • Scrape away excess adhesive, separating each tile from the next.
  • All tiles must be fully embedded using a rubber mallet.
Start-tiling-new
  • Start off by creating building lines in your work space. This will allow you to achieve straight lines.
  • Do not butt join tiles. Please use recommended spacing on box or in the product details.
  • For Kilimanjaro tiles please use a minimum tile spacing of 8mm and above. 
  • When tiling large areas. Create expansion joints to allow for structural movement.
  • This is done by using a flexible compound (such as silicone) between tiles.
  • Expansion joints should be made every 9m2.
  • The perimeter joint needs to be 5-8mm.
correct-spacing-new
  • Make sure all the joints are clean.
  • Apply the grout using a rubber squeegee.
  • Grouting should be done 24 hours after the installation of the tiles to allow, the tile to set properly.
  • Once the grout has set the entire area must be cleaned, with a damp cloth, Grout Off and Easy Clean, Cleaning agents are recommended.
  • Avoid walking on the tiles for 2-3 days to prevent loosening of the tiles.
Grouting-new